تجهیزات تولید بلوک های بتنی Metalika RVP-2000/1 Single layer block machine جدید

METALIKA RVP-2000/1 is a single-layer automatic concrete block machine.

RVP-2000/1 automatic concrete block making machine can be configured with a pallet stacker and be a short automatic production line or in a configuration with elevators and packaging stations to complete the automatic production of concrete blocks.

The configuration of the production line depends on the desired level of automation, capacity and budget.

It is important to understand that the equipment we produce is modular and compact in design, which means that you can add additional equipment in the future and improve (raise) the level of automation.

RVP-2000 and RVP-2000/1 are the best-selling automatic vibratory presses in our region, in addition to the quality and vibration technology, our equipment has the highest level of standard equipment included in the price.

VIBRATION TECHNOLOGY:

BOTTOM VIBRATION:
"SINHRO" VIBRATION TECHNOLOGY (*intellectual property of the company "METALIKA")

The vibration technology "SINHRO" METALIKA has synchronized, controlled vibrations for maximum product quality with the shortest cycle periods, driven by a frequency regulator.

- Even distribution of vibrations in all positions of the vibrating plate.
- Synchronized vibration system.
- Possibility of adjusting the strength of the vibration force and frequency adjustment.

Drive on "SINHRO" vibrators are electric motors of the German manufacturer "LENZE" (WEG) with a power of 2x 5.5kW. The highest efficiency of the electric motor is marked "IE3"

*Optionaly vibration technology can be "SERVOFLEX" powered with servo motors.

VIBRATION STRENGTH:

Frequency: 50Hz
Motor speed (rpm): 3.000rpm
Centrifugal force of vibrations: 70kN

UPPER VIBRATION:

Vibrations on the stamp (upper vibrations) consist of two vibrators of the Italian manufacturer "OLI"
The vibrators are positioned with a vibrating plate on the mold that evenly transmits vibrations to the upper tool (upper mold)

CENTRAL AUTOMATIC LUBRICATION OF VIBRATORS:

The system is standard equipment for the automatic vibropress RVP-2000 with temperature measurement.
Central lubrication ensures a longer service life of the "SINHRO" vibrator.
A solution for overloaded work on the vibratory press and avoiding overheating of the vibrator due to careless maintenance.
When measuring the temperature, in case of exceeding the temperature, the vibratory press is automatically turned off and an alarm is triggered to prevent overheating.

TECHNICAL DATA:

Length: 7.940 mm
Width: 2.510 mm
Height: 3.600 mm
Weight: 9.000 kg

Minimum height of concrete product: 25 mm
Maximum height of concrete product: 400 mm
Maximum height of curb: 350 mm
Pallet (pad) dimensions: 1200x550 mm
Usable surface of the mold: 1130x500 mm

Number of pieces of concrete pavers 10x20 cm in the mold: 20 pieces
Number of pieces of concrete hollow blocks 20x20x40 cm in the mold: 5 pieces

Automatic operation: Yes, PLC “Schneider Electric”
Installed power: 30 kW
Oil tank: 400L
Hydraulic pressure: 170 bar

Voltage (V): 3x400
Control voltage: 24V, 230V
Hydraulic voltage: 24V

CAPACITY:

Concrete paving stones (pavers) 10x20cm, height 6cm, without fine layer: 824 m2

Concrete hollow blocks 20x20x40cm: 8.000 blocks

All capacities are calculated as maximum - 100% efficiency in ideal conditions for 8 hours of operation.
When calculating real production capacities, take into account the actual efficiency factor of about 80% and other factors that may affect productivity, such as: properties of the concrete mix (concrete recipe), effective work of workers (with breaks), concrete delivery, concrete product design and settings of the RVP-2000 vibratory press.