دستگاه شستشوی بطری Krones Linatronic M

Machine type: empty bottle inspector
Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included
Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection
Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45°
Residual liquid and caustic detection: high frequency and infrared
Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera
Foreign bottle detection at the infeed: container height, contour and colour via camera
Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge
Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser)
Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm
Minimum required room height: 2,810 mm
Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm
Direction of operation: right-left machine
Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A
Standards: IEC 61439-1 / IEC 60204-1, CE marked
Machine base and housing: stainless steel (AISI 304 equivalent), clean design
Emergency mode: passage operation without inspection
Overview
This Krones Linatronic M is an empty bottle inspector for glass bottles
built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages
The machine combines camera-based base
sealing surface
screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container
and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height
contour and colour detection. Three Ecopush rejection points separate foreign
dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal
Technical data
Test bottle programme with 2D code
Equipment
DualFlash neck finish lighting
separate inspection of outer and inner sealing surface
Combined thread inspection via the sidewall mirror assembly
Fallen container detection in front of the machine (photoelectric sensors with infeed pusher)
Base blow-off unit with clocked air nozzle for foam and lubricant residues
Container blower at the infeed
conveyor dead plate (3-fold)
Servo-driven collection module for rejected containers at the discharge
Festo pneumatic system with maintenance unit
food-grade lubricants
OEM machine data sheet and dimension drawing
Condition
Used
technically complete. The machine is still installed and under power at its production site
the photographs show it in the installed state
Availability
Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement
dismantling
loading and transport can be quoted on request