مرکز ماشینکاری Matec 30 HV

This MATEC 30 HV (2003) Universal Machining Centre was manufactured in 2003 in Germany. It is controlled by a BOSCH TYPE 3 OSA Control unit. This CNC traveling column milling machine (3+2 axes) is equipped with a main spindle type DMS 112 with speed range up to max. 12,000 min/-1 and drive power 30 kW. It has a NC swivel head (Sauter) with swiveling +/- 90 ° and graduation +/- 3 arc seconds. In addition it runs with a tool changer with 48 positions and a HSK A63 tool holder. The table is a NC rotary table with a clamping surface of 3,500 x 835 mm and 7 T-slots. IKZ 70 bar, paper belt filter and chip conveyor (ejection height 1200mm) and 3D radio measuring probe come with the machine. The machine is prepared with a 4th axis interface. The condition of the machine is very good - it is still in production and maintenance service has been applied regularly according to manufacturer's standards. An on-site inspection is possible at any time.
application type: Milling
Location: Germany
machine type: Machining centers (universal)
availability: August 2024
control unit brand: BOSCH
GINDUMAC ID: DE-MIL-MAT-2003-00001
Measurements width: 7000 mm
Measurements depth: 6000 mm
Measurements height: 4000 mm
Spindle speed range: 12,000 min/-1 1/MIN
Spindle motor power: 30 kW
Number of axis: 3+2
X-AXIS Movement: 3000 mm
X-AXIS Rapid traverse: 30 m/min
Y-AXIS Movement: 800 mm
Y-AXIS Rapid traverse: 30 m/min
Z-AXIS Movement: 1100 mm
Z-AXIS Rapid traverse: 30 m/min
Type of tool holder: HSK 63 A
Chip conveyor: Yes
Internal cooling: Yes
Main spindle: type dms 112 // max. Torque 190 nm // drilling capacity steel approx. 60 mm // milling capacity approx. 500 cm³ // thread cutting m30- Feed rates: rapid traverse (x / y / z) 30 m/min // feed speed 30,000 mm/min- Nc swivel head: sauter swiveling +/- 90 ° // pitch +/- 3 arc seconds- Work table: table clamping surface 3,500 x 835 mm // t-slots 7x // t-slots - width 18-h7 // nc rotary table sempuco skh 4/630 // horizontal faceplate // faceplate diameter 630mm // embedded in the machine table- Tool changer: number of tool positions 48 pos.- Total connected load: 60kva- Fully enclosed work area- Loading doors suitable for crane loading // automatic opening // movable partition wall- Clamping hydraulics interface 4th axis // nc rotary table rw/nc 160/250 (hofmann)- Face plate diameter 250mm // center height 160mm // hydraulic tailstock with quill mk4
Machine still under production and can be inspected at any time- The machine has been serviced every year by the service department and is technically in good condition