Stamping press Schuler GMO 2-315-2000-160

Coil Reel KOHLER 4000.1
Straightener KOHLER KRM 50.400/9
KOHLER Loop control BÜ5
Roll feed KOHLER WVE 120/400
HIESSL belt lubrication (wide spray)
UNIDOR control system
Tool loading consoles


Press Design
drive system: knuckle-joint
frame design: H-frame, monoblock
openings in uprights: yes
number of suspensions: 2
feedstock transport direction: left to right
Press forces
total force (nominal): 315 to
nominal work capacity: 38 kNm
Press Table
table surface (left-right): 2000 mm
table surface (front-back): 1200 mm
thickness of bolster plate: 200 mm
Slide
slide force: 315 to
table surface (left-right): 1995 mm
table surface (front-back): 1100 mm
stroke: 160 mm
stroke rate (max.): 80 /min
slide (mechan. Press)
slide adjustment: 140 mm
stroke rate (min.): 20 /min
stroke rate (max.): 80 /min
main drive power: 90 kW
Tool Assembly Dimensions
shut height (stroke down, adjustment up), BDC: 555 mm
distance between columns (H-frame): 2060 mm
passline opening (free passage in side columns): 1060 mm
Overall Specifications (coil lines)
sheet width max.: 400 mm
sheet thickness max.: 5 mm
Coil Chair
coil weight max.: 4 to
Decoiler
design: single reel, traversable
sheet width max.: 400 mm
sheet width (min): 30 mm
coil weight max.: 4 to
max. diameter of coil: 1500 mm
mandrel expansion range from: 460 mm
mandrel expansion range up to: 530 mm
movement: 1500 mm
Leveller Unit
sheet width max.: 400 mm
sheet width (min): 50 mm
material cross section max. (450 N/mm2): 1000 mm²
number of leveller rolls: 9
diameter of leveller rolls: 50 mm
number of infeed-/outfeed rolls: 150
feed velocity min.: 5 m/min
feed velocity max.: 50 m/min
Strip-Feeder
feeder type: roll feeder
sheet width max.: 400 mm
sheet thickness max.: 5 mm
Electrical specifications
mains voltage: 400 V
mains frequency: 50 Hz
Dimensions / weights
total weight approx.: 45000 kg
Attachments (presses)
decoiler: yes
leveller unit: yes
strip feeder: yes